<rp id="2xrzj"></rp>

              1. 您好!歡迎光臨東莞市橫瀝旭裕德機械設備廠網站!
                您的位置: 首頁 > 產品中心 > 松棉機

                產品中心

                服務熱線

                18820307561

                公司實力

                松棉機

                松棉機(開棉機、打棉機、纖維梳松機)

                產品介紹

                 

                1:用途用于二維\三維螺絲棉、PP棉、公仔棉、普通中空棉進行均勻開散蓬松,一次性開松,適合玩具廠、沙發廠、床上用品廠、服裝廠、纖維制品廠開松使用。

                2:特點、利用一個大棍筒和多個小棍筒旋轉咬合,主棍1400轉/分鐘低轉速運行,將原棉進行高達上萬次的梳松整理,且不損傷原棉,其最大的優點,開松三維螺絲棉一次性開松率高達99%以上,而且不會損傷棉花。

                3:采用自動送棉裝置,操作安全簡便,連續作業時間長,維修率低;全機采用高溫烤漆,不易生銹。

                4:無縫鋼管主棍筒,加數個小棍筒結合作業,開槽纏繞專用齒條,主棍筒已做高速電子動平衡處理,左右誤差僅為0.1-1克,保證機器運行更加平穩無震動,并且機器整體使用壽命更長,維護成本更低。該機體積小,質量高,使用壽命長,維修率低,產量比同類提高60%。

                5:可安裝金屬探測報警裝置,遇到金屬物體(2mm以上)進入松棉機,就會馬上報警,停機并自動從輸送帶倒出來,避免金屬物體損壞機身內的鋼齒。

                適用產品:3D-25D纖維棉的開松梳理及熱風棉,針棉,噴膠棉等纖維產品的邊角料再次開松。

                 

                 

                型號

                XYDSM-360

                XYDSM-560

                XYDSM-790

                規格

                2200x720x920mm

                2200x920x920mm

                2200x1160x1070mm

                電源

                380V   50HZ

                功率

                4kw+0.75kw

                4kw+0.75kw

                5.5kw+0.75kw

                產量

                50-100kg/h

                120-200kg/h

                200-350kg/h

                開松率

                99%以上

                重量

                440kg

                480kg

                580kg

                 

                型號

                XYDSM-1000

                XYDSM-1200

                XYDSM-1500

                規格

                2200x1350x1140mm

                3150x1600x1220mm

                3150*1900*1220mm

                電源

                380V   50HZ

                功率

                7.5kw+0.75kw

                7.5kw+0.75kw

                11kw+0.75kw

                產量

                300-450kg/h

                450-580kg/h

                580-680kg/h

                開松率

                99%以上

                重量

                650kg

                800kg

                1000kg

                 


                Cotton Loosening Machine

                Product Introduction

                 

                1. Suitable for loosening of 2D/3D Screw cotton, Polypropylene cotton, Doll Cotton and Hollow cotton. The loose cotton can then be used in products such as toys, sofa, bedding, textiles and other fiber products.

                2. This machine features a main mixture tube connected to many other small mixture tubes. The main mixture tube will rotate at a low speed of 1400 RPM for as much as 10,000 times to loosen the cotton while not damaging the cotton itself. This product can loosen 99% of 3D Screw cotton just once while not damaging the cotton itself.

                3. This machine is equipped with an automated cotton feeder mechanism, which allows simple and safe operation. It allows prolonged operation with low failure rate. The entire machine is treated with high heat resistance paint and not easily prone to rust.

                4. The main mixture tube is connected to various small mixture tube without gap. The rotational mechanism is equipped with dedicated gear rack. It is weight balance at high speed, with only 0.1-1g allowance. This assures that the machine operates at minimum vibration while increasing the operation lifespan and reduce the need for frequent maintenance. Comparing with other similar product, it can produce 60% higher yield.

                5.  It is possible to install metal detector within the machine. Upon detecting metal objects(>2mm) entering the machine, the detector will trigger an alarm and stop the machine. It will also automatically reverse out the load to prevent the metal object damaging the gears in the machine.

                Suitable for: Loosening of 3D-25D fibre cotton, hot air cotton, polyester wadding and reused scrap material.

                 

                Model

                XYDSM-360

                XYDSM-560

                XYDSM-790

                Dimension

                2200x720x920mm

                2200x920x920mm

                2200x1160x1070mm

                Power Input

                380V   50HZ

                Power

                4kw+0.75kw

                4kw+0.75kw

                5.5kw+0.75kw

                Yield

                50-100kg/h

                120-200kg/h

                200-350kg/h

                Loosening Rate

                Above 99%

                Weight

                440kg

                480kg

                580kg

                 

                Model

                XYDSM-1000

                XYDSM-1200

                XYDSM-1500

                Dimension

                2200x1350x1140mm

                3150x1600x1220mm

                3150*1900*1220mm

                Power Input

                380V   50HZ

                Power

                7.5kw+0.75kw

                7.5kw+0.75kw

                11kw+0.75kw

                Yield

                300-450kg/h

                450-580kg/h

                580-680kg/h

                Loosening Rate

                Above 99%

                Weight

                650kg

                800kg

                1000kg

                最新資訊

                網站首頁 充棉機定制 產品中心 應用領域 關于我們 工廠設備 聯系我們 新聞資訊
                咨詢服務熱線
                聯系電話:
                188-2030-7561
                聯系人:李先生
                微信號:188-2030-7561
                地址:廣東東莞市橫瀝鎮山廈村上東路36號
                Copyright ? 2022 東莞市橫瀝旭裕德機械設備廠 版權所有,違權必究 技術支持【東莞網站建設 粵ICP備2020092992號GMAP】【BMAP】【后臺管理】【返回頂部
                欧美高清自有码中文字,国产制服丝袜动漫综合在线,国产短视频精品一区,日本v二区三区更新不卡-欧美拍拍视频免费大全|变态另类视频二区-亚洲欧美成人在线播放