<rp id="2xrzj"></rp>

              1. 您好!歡迎光臨東莞市橫瀝旭裕德機械設備廠網站!
                您的位置: 首頁 > 產品中心 > 自動化松棉充棉生產線

                產品中心

                服務熱線

                18820307561

                公司實力

                自動化松棉充棉生產線

                自動化松棉、充棉生產線:

                 1:采用一臺自動松棉機連接一臺或多臺、單頭或雙頭箱式充棉機通過自動控制系統供充棉機使用,當充棉機內有棉時,松棉機會自動停止給棉,當充棉機內棉不夠用時,松棉機會自動給棉到充棉機內,替代了以往的人工操作、節省了時間、降低了生產成本,提升了產品的競爭力。

                2:把幾十公斤至兩百多公斤原棉一次性放入儲棉箱的輸送帶上,機器將自動給棉入機進行開松梳理。替代以往的人工給棉(喂棉)。

                3:用途用于二維\三維螺絲棉、PP棉、公仔棉、普通中空棉進行均勻開散蓬松,一次性開松,適合玩具廠、布藝制品廠、床上用品廠、服裝廠、寵物用品等、需填充纖維制品的廠家均可使用。

                4:特點、利用一個大棍筒和多個小棍筒旋轉咬合,主棍1400轉/分鐘低轉速運行,將原棉進行高達上萬次的梳松整理,且不損傷原棉,其最大的優點,開松三維螺絲棉一次性開松率高達98%以上,而且不會損傷棉花。

                5:采用自動送棉裝置,操作安全簡便,連續作業時間長,維修率低;全機采用高溫烤漆,不易生銹。

                6:無縫鋼管主棍筒,加數個小棍筒結合作業,開槽纏繞專用齒條,主棍筒已做高速電子動平衡處理,左右誤差僅為0.1-1克,保證機器運行更加平穩無震動,并且機器整體使用壽命更長,維護成本更低。該機體積小,質量高,使用壽命長,維修率低,產量比同類提高60%。

                7:適用產品:3D-25D纖維棉的開松梳理。適用填充材料二維/三維棉、長短纖維棉,(如:0.7D-15D*25mm/32mm/64mm)及邊角料均可填充。

                8:可安裝金屬探測報警裝置,遇到金屬物體(2mm以上)進入松棉機,就會馬上報警,停機并自動從輸送帶倒出來,避免金屬物體損壞機身內的鋼齒。

                備注:需配空壓機的參數:22KW-37kw,排氣量:1.3-1.6m3/min。              

                Automatic loosening and filling production line:
                1: An automatic loosening machine is used to connect one or more, single-head or double-head box-type cotton filling machines for use by automatic control system. When there is cotton in the cotton filling machine, the loosening machine stops feeding cotton automatically. When there is not enough cotton in the cotton filling machine, the loosening machine automatically feeds cotton to the cotton filling machine, which replaces the previous manual operation, saves time, reduces production costs and improves the production efficiency. Competitiveness of products.


                2: Put dozens of kilograms to more than 200 kilograms of raw cotton into the conveyor belt of the cotton storage box at one time, and the machine will automatically feed the cotton into the machine for loosening and carding. Replace the previous manual cotton feeding.


                3: Used for two-dimensional three-dimensional screw cotton, PP cotton, doll cotton, ordinary hollow cotton to evenly disperse and fluffy, one-time loosening, suitable for toy factories, fabric products factories, bedding factories, clothing factories, pet products and other factories that need to be filled with fiber products.


                4: Characteristic, using a big barrel and several small barrels to rotate and occlude, the main barrel runs at low speed of 1400 rpm, carding raw cotton up to 10,000 times without damaging raw cotton. Its greatest advantage is that the one-time loosening rate of three-dimensional screw cotton is as high as 98%, and it will not damage cotton.


                5: Use automatic cotton feeding device, safe and simple operation, long continuous operation time, low maintenance rate; the whole machine uses high temperature paint, not easy to rust.


                6: The main barrel of seamless steel tube, combined with several small barrels, has been grooved and wound with special racks. The main barrel has been processed with high-speed electronic dynamic balance. The left and right error is only 0.1-1 g, which ensures the machine running more smoothly and without vibration, and the overall service life of the machine is longer, and the maintenance cost is lower. The machine has the advantages of small size, high quality, long service life, low maintenance rate and 60% higher output than the same kind.


                7: Applicable products: Open carding of 3D-25D fiber cotton. It is suitable for filling materials such as 2-D/3-D cotton, long and short fibre cotton (e.g. 0.7D-15D*25mm/32mm/64mm) and corner material.


                8: Can install metal detection alarm device, encounter metal objects (more than 2 mm) into the loosening machine, will immediately alarm, stop and automatically pour out from the conveyor belt, to avoid metal objects damage the steel teeth in the fuselage.


                Remarks: Air compressor parameters: 22KW-37kw,

                Exhaust volume: 1.3-1.6m/min.



                型號

                Model

                XYDZDSM-CM2

                 

                規格

                 

                Specification

                 

                1、自動松棉機

                Automated carding machine

                3300*1380*2050mm

                2、送料機

                Material conveyor feeder machine

                750*550*950mm

                3雙頭充棉機

                Double cotton feeder machine

                1650x1250x2200mm

                電壓

                 

                Voltage

                380v   50hz

                功率

                Power

                7.5+0.75x3+2.2x3kw

                氣壓

                Pressure

                4-8kg/ cm2

                充棉管直徑

                Cotton tube diameter

                Φ12-19-25-30-38-50-65mm

                重量

                weight

                2000kg

                最新資訊

                網站首頁 充棉機定制 產品中心 應用領域 關于我們 工廠設備 聯系我們 新聞資訊
                咨詢服務熱線
                聯系電話:
                188-2030-7561
                聯系人:李先生
                微信號:188-2030-7561
                地址:廣東東莞市橫瀝鎮山廈村上東路36號
                Copyright ? 2022 東莞市橫瀝旭裕德機械設備廠 版權所有,違權必究 技術支持【東莞網站建設 粵ICP備2020092992號GMAP】【BMAP】【后臺管理】【返回頂部
                欧美高清自有码中文字,国产制服丝袜动漫综合在线,国产短视频精品一区,日本v二区三区更新不卡-欧美拍拍视频免费大全|变态另类视频二区-亚洲欧美成人在线播放